Comments on: BrushBotComm programming with a Teensy http://colab.portlandrobotics.org Collaborative Space for PARTS Thu, 20 Oct 2011 13:32:01 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: montyg http://colab.portlandrobotics.org/group-projects/parts-swarm/parts-swarm-design/brushbot-comm-board/brushbotcomm-programming-with-a-teensy/comment-page-1/#comment-4478 montyg Thu, 03 Jun 2010 07:09:53 +0000 http://parts.laen.org/?page_id=249#comment-4478 The first message about PAGEL and BS2 is expected -- something that we're all seeing, but not something I've looked into. It should work despite this message. The 2nd error is definitely a problem though. What does your setup look like? Teensy2.0 programmed w/ TeensyISP? Programming cable as shown above? BrushBotComm board w/ or w/o transistors? Did you select the board option of "BrushBot Comm Board via Arduino ISP"? Was your TeenyISP, programming cable, and BrushBotComm board tested out yet at one of the project meetings? Monty The first message about PAGEL and BS2 is expected — something that we’re all seeing, but not something I’ve looked into. It should work despite this message.

The 2nd error is definitely a problem though. What does your setup look like? Teensy2.0 programmed w/ TeensyISP? Programming cable as shown above? BrushBotComm board w/ or w/o transistors?
Did you select the board option of “BrushBot Comm Board via Arduino ISP”?
Was your TeenyISP, programming cable, and BrushBotComm board tested out yet at one of the project meetings?

Monty

]]> By: William Bowers http://colab.portlandrobotics.org/group-projects/parts-swarm/parts-swarm-design/brushbot-comm-board/brushbotcomm-programming-with-a-teensy/comment-page-1/#comment-4474 William Bowers Thu, 03 Jun 2010 05:29:23 +0000 http://parts.laen.org/?page_id=249#comment-4474 Any helpful feedback for the following error that occurs during ISP programming using Auduino 0018 IDE? avrdude: please define PAGEL and BS2 signals in the configuration file for part ATtiny44 avrdude: Yikes! Invalid device signature. Double check connections and try again, or use -F to override this check. Any helpful feedback for the following error that occurs during ISP programming using Auduino 0018 IDE?

avrdude: please define PAGEL and BS2 signals in the configuration file for part ATtiny44
avrdude: Yikes! Invalid device signature.
Double check connections and try again, or use -F to override
this check.

]]>