Archive for the ‘Group Projects’ Category

« Older Entries

Mouse Sensor Board Build (3/3/2012)

Tuesday, February 21st, 2012

What: Build up some optical mouse sensor boards using the ADNS-2620 sensor described in this previous blog entry.
This will involve some hot-plate reflow soldering using stencils and solder paste, some through-hole soldering, and testing.
There are only 9 surface mount parts and 3 through-hole parts, so this is a relatively simple build.

When: During the normal March PARTS meeting (3/3/2012)
Meeting starts at 10:30am; we’ll probably start building at 11 or 11:30am after a short presentation and show-n-tell

Who: You!  But, we’re limited to only 12 boards + a couple extra.  First come first serve.

Cost: $7

Bring:

  • A small desk lamp is very helpful
  • Magnification is very helpful (the smallest parts are 0603)
  • We could use a couple more soldering iron stations, power cords, and power strips
  • An Ardunio, if you have one, for testing out your sensor.  We’ll have an Arduino or two set up for testing as well.
  • A 4-pin 0.1″ jumper cable to connect the female 4-pin 0.1″ spaced square-pin header on the OptiMouse board to your Arduino

 

Details:
Schematic, layout and BOM here:
ADNX_26XX_Breakout_A_2_boardBuild (PDF)

Eagle files:
ADNS_26XX_Breakout_A_2 (zip)

See you there!

Monty

Tags: ,
Posted in Group Projects | 1 Comment »

Geographic Center of Zipcodes

Saturday, April 16th, 2011

At the last meeting I took down everyone’s zipcodes, in order to  determine the geographic center of the members present. The goal was to determine (roughly!) where a better group project meeting site would need to be located if we move away from bRainSilo.

(more…)

Posted in Group Projects | 1 Comment »

BrushBot board build Monday 1/10

Sunday, January 9th, 2011

There’s still a number of BrushBotComm boards that people want to build up, and at Saturday’s meeting we decided to try for a somewhat impromptu board build at this Monday’s (1/10) group project meeting.  I realize this is short notice, but at the meeting enough people expressed interest to make it worthwhile.  We can have another small build session later for those who can’t make it.

Scott’s bringing the hot-plate reflow system and I’m bringing the parts.  You bring whatever parts you might have already gotten from me, some magnifying device if needed, a soldering iron (if you have one) and some cash if you haven’t paid for parts yet.

We’ll be at the bRainSilo:
bRainSilo.  7pm.

http://brainsilo.org/wiki/Location

See you there!

Monty

Posted in PARTS Swarm | No Comments »

Bot Build Night Oct 18

Monday, October 18th, 2010

A small group of us have been regularly getting together every other Monday night at the bRainSilo to work on swarm bots.  We’d love to have more people come join us — especially if you built one of the BrushBotComm boards a while back!  We’re at the point where we have bidirectional IR comm code working and want to try it out w/ larger swarms.

This get together is not just about swarm bots though — rather than toiling away alone in the basement on that killer new robot, why not bring it down and work on it in the company of other robot enthusiasts?

7pm, bRainSilo: http://brainsilo.org/wiki/Location

Hope to see you there!

Monty

Posted in Group Projects | No Comments »

No 9/6 project meeting

Monday, September 6th, 2010

Not enough of the regulars can make it tonight so I’m going to cancel the BrainSilo build session.

Have a great Labor Day!

Monty

Posted in Group Projects | No Comments »

Bot Build Night Aug 23

Monday, August 23rd, 2010

Ditto below!

See you there,

Monty

Posted in Group Projects | No Comments »

Bot Build night Aug 9

Monday, August 9th, 2010

We’ve been getting together every other Monday night at the silo to work on group projects, but really what we want to see is more robots being built, be it by individuals or groups.  So even if you’re not interested in the current swarm robot project, feel free to bring your own robot-to-be on down to share in the excitement of mashing together mechanical bits, hard bits, and soft bits to do cool stuff.

And if you DO have brushbots, bring them down and let’s get them talking!

7pm, bRainSilo:
http://brainsilo.org/wiki/Location

Hope to see you there!

Monty

Posted in Group Projects | No Comments »

Project Meeting July 26

Sunday, July 25th, 2010

Pete, Tim, Scott and myself will be there.  Will you?  Bring your Brush Bot on down and let’s get them talking!

7pm, bRainSilo:
http://brainsilo.org/wiki/Location

Monty

Posted in PARTS Swarm | No Comments »

Project meeting July 12

Monday, July 12th, 2010

Last time Scott and I got four or five BrushBots running around in an arena with comm boards attached — one configured as a transmitter and the others as receivers. We only had simple RX and TX code running, but the receivers were picking up messages quite frequently; much better than we were expecting, actually.
But just five bots isn’t too exciting. It’s time to get a bigger swarm together and develop better message passing code! Bring your brushbots, bring your comm boards and let’s swarm!

While Scott and I hearded bots around, Tim got his steering control of the brushbots (a homemade toothbrush-head based bot in his case) working. The really cool thing is that he’s only using a single vibrating motor, yet still getting steerability! Come on Tim… Hurry up and upload the details on how you’re doing this!

Hope to see you all tonight,

7pm, bRainSilo:
http://brainsilo.org/wiki/Location

Monty

Posted in PARTS Swarm | 1 Comment »

BrushBotComm board build follow-up Monday

Monday, April 5th, 2010

Yes, there is another PARTS Project meeting tonight!

Time: Monday 4/5, 7:00pm
Location: bRainSilo: http://brainsilo.org/wiki/Location

We will be continuing with the BrushBotComm boards — soldering on the final components, including the missing IR LED resistors and the IR
LED’s themselves; making programming cables; and learning how to load code onto them.

As I mentioned in this blog entry the ArdunioISP should work well for a programmer, and hopefully as a serial link for debugging.  So, if you have a spare Arduino that you can use for a programmer, bring it.  Or, I have a handful of cosmetically defective (but fully functional) Teensy2.0′s available for really cheap.

Bring:
*BrushBotComm boards and extra parts you’ve received.
*Soldering iron — if you have a decent one with a fine tip.  This is especially important this meeting as we have a fair amount of hand soldering to do.
*Desk lamp if you can — we didn’t really have enough light last time
*Vision enhancement devices — I’ll bring my stereo-microscope and what magnifiers I have, but I think we could have used more last time
*Money for Arduinos if you need one for programming.
*Laptop if you have one to use for programming.

Monty

Tags: ,
Posted in Group Projects, PARTS Swarm | No Comments »

« Older Entries